banner
Product
  • Phone

    86-531-81296190

  • Address

    Zheshan Industrial Park, West of Liugang Road, Jinan, Shandong, China

  • E-mail

    k@waimaotong.com

LatestProducts
Expert Manufacturer of Coal Gas Generator Ln-500gfl

Expert Manufacturer of Coal Gas Generator Ln-500gfl

China Expert Manufacturer of Coal Gas Generator Ln-500gfl, Find details about China Gas Generator, Power Generator from Expert Manufacturer of Coal Gas Generator Ln-500gfl - Jinan Lvneng Power Machinery Equipment Co., Ltd.

Description

Basic Info
  • Model NO.: LN-500GFL
  • Certification: ISO
  • Standard: Standard
  • Brand Name: Lvneng
  • Rated Speed: 1000/1200rpm
  • Rated Voltage: 400V/230V
  • Cylinder Bore: 190mm
  • Cooling Method: Water Cooler
  • Transport Package: Plastic Packag
  • Origin: Shandong Jinan
  • Gas Source: Methane Gas
  • Power: 500kw
  • Model Number (Engine Type): Ln-500gfj
  • Prime Power/Standby Power: 400kw/500kw
  • Rated Frequency: 50/60Hz
  • Phase: AC 3-Phase, 4 Wire
  • Stroke: 210mm
  • Trademark: lvneng
  • Specification: ISO
  • HS Code: 8502200000
Product Description
Expert Manufacturer of Coal gas generator LN-500GFL                                                            
Product Description
Welcome to the showroom of Jinan Lvneng Power Machinery Equipment Co., Ltd!
We are professional and dedicated system supplier of energy production by diesel and gas powered generator set, we are basically a manufacturer of generator set for various kinds of fuel such as diesel, natural gas, biogas, biomass gas, coal gas, coal bed gas(CBM), associated gas and syngas.

Worksite requirements

The worksite needs to meet following basic requirements:
 a)  Ambient temperature between -40ºC~40ºC;
 b)  Relative humidity less than 95%(35ºC);
 c)  Site elevation not higher than 2500m;
 d)  For outdoor installation, simple rain shelter is required.

Gas requirements: 
The coal gas must be purified before burning in engine: 
1. Gas temperature≤ Local temperature + 15º C(≤ 40º C is better)
2. Gas Pressure can be adjusted from 5-20 kPa, the changing pressure rate ≤ 1kPa/min. 
3. Use low-sulfur coal, one set sulfur scrubber is necessary (H2S≤ 200mg/Nm3)
4. If the CH4 covers less than 30%, the total content of CH4 and O2 should not less than 28%, the content of O2 should not less than 16%.
5. Tar and Particulate matter≤ 50mg/Nm3. 
6. Diameter of Particulate matter≤ 5μ M, particulate content≤ 30mg/Nm3. 
7. Moisture content≤ 40g/Nm3
8. Heat Value of coal gas: ≥ 4.2Mj/ Nm3
 
Service committee
1. Pre-sale service: 
1) We will send our engineer to prospect the site of power station free of charge.
2) According to the situation of site, we will provide design drawings, such as power plant floor drawing, cooling system drawing, genset foundation, control room design, etc.
 
2. Sale service:
1) Operator training would be conducted by Lvneng technicians during the process of commissioning or Factory training course in China,
2) Installation and commission of the genset would be instructed assisted by Lvneng technicians at site.
 
3. After-sale service:
1) We have strong after-sale team, we will response within 24 hours and provide technical supports by phone or site guiding, help our clients to gain the biggeset profit.
2) For the quality problem, we will service for you free of charge during the guarantee period.
3) We  provide one year guarantee period and lifetime service.

Plentiful spare part supply
1. We have spart parts department, plentiful spare part supply for all genset model will guarantee genset lifetime running.
2.All parts were from original factories or professional factories,complete in specification,keep good quality.
 
 Parameter of  Expert Manufacturer of Coal gas generator LN-500GFL                                                         
 
  Parameter of Coal gas generator set
Model Number (Engine Type) LN-500GFL
Brand Name LVNENG
Prime Power/Standby Power 400KW/500KW
Rated Speed 1000/1200RPM
Rated Frequency 50/60Hz 
Rated Voltage 400V/230V 
Phase AC 3-Phase, 4 wire
Voltage Stability ≤±2%
Voltage transient ≤±10%
Voltage Stable time ≤1s
Heat consumption ≤9.8mj/kw.h
Lubricant consumption ≤1.0g/kw.h
Engine Capacity 32 L
Cylinder Number 6
Cylinder Bore 190mm
Stroke 210mm
Starting System DC 24V electric motor
Cooling method water cooler
Lubricant method Passive and flying lubricant
Isolation class H
Protection IP23
Alternator Siemens
Power Factor 0.8 lagging 
Exciting method brushless 
Colour your choice 
Certificates ISO 9001:2008, CE
Warranty 1 year or 1000 running hours which arrives first
Type Open 
Control system Automatic alarm system 
Size 6200x2100x2800mm(without canopy)
Weight 12500kg