500kw/625kva jinan series biogas generator set
Welcome to the showroom of Jinan Lvneng Power Machinery Equipment Co.,Ltd.
We are professional and dedicated system supplier of eneygry production by diesel and gas powered generator set, we are basically a manufacturer of generator set for various kinds of fuel such as diesel, natural gas,methane, biogas,biomass gas, coal gas, coal bed gas(CBM), associated gas and syngas.
Product Description
Gas composition
Biogas is a mixture gas, main composition is Methane (CH4) and Carbon dioxideCO2.Methane covers 45%- 70%, carbon dioxide covers 30%--40% and also a bit of other gas like Hydrogen (H2), Carbon, monoxide (CO), Hydrogen sulfide (H2S) sulfide Oxygen(O2), Nitrogen (N2), etc.Because there are abundant of methane, the biogas can be used as a kind of fuel.
Biogas is a kind of product that organics is resolved by bacterium under the anaerobic condition.Garbage in the city, sludge in the sewage treatment plants, excrement and straws all can be used to generate biogas.
The worksite needs to meet following basic requirements:
Worksite requirements |
A) Ambient temperature between -40ºC~40ºC; |
B) Relative humidity less than 95%(35ºC); |
C) Site elevation not higher than 2500m; |
D) For outdoor installation, simple rain shelter is required |
Gas requirements:
The coal gas must be purified before burning in engine:
1. Gas temperature≤ Local temperature + 15º C(≤ 40º C is better)
2. Gas Pressure can be adjusted from 5-20 kPa, the changing pressure rate ≤ 1kPa/min.
3. Use low-sulfur coal, one set sulfur scrubber is necessary (H2S≤ 200mg/Nm3)
4. If the CH4 covers less than 30%, the total content of CH4 and O2 should not less than 28%, the content of O2 should not less than 16%.
5. Tar and Particulate matter≤ 50mg/Nm3.
6. Diameter of Particulate matter≤ 5μ M, particulate content≤ 30mg/Nm3.
7. Moisture content≤ 40g/Nm3
8. Heat Value of coal gas: ≥ 4.2Mj/ Nm3
Service committee
1. Pre-sale service:
1)We will send our engineer to prospect the site of power station free of charge.
2) According to the situation of site, we will provide design drawings, such as power plant floor drawing, cooling system drawing, genset foundation, control room design, etc.
2. Sale service:
1
1) Operator training would be conducted by Lvneng technicians during the process of commissioning or Factory training course in China,
2) Installation and commission of the genset would be instructed assisted by Lvneng technicians at site.
3. After-sale service:
1) We have strong after-sale team, we will response within 24 hours and provide technical supports by phone or site guiding, help our clients to gain the biggeset profit.
2) For the quality problem, we will service for you free of charge during the guarantee period.
3) We provide one year guarantee period and lifetime service.
Plentiful spare part supply
1. We have spart parts department, plentiful spare part supply for all genset model will guarantee genset lifetime running.
2.All parts were from original factories or professional factories,complete in specification,keep good quality.
Parameter of 500kw/625kva jinan series biogas generator set From Lvneng Power
Parameter of Biogas Generator Set |
Model Number (Engine Type) |
LN-500GFZ |
Brand Name |
LVNENG |
Prime Power/Standby Power |
400KW/500KW |
Rated Speed |
1000/1200RPM |
Rated Frequency |
50/60Hz |
Rated Voltage |
400V/230V |
Phase |
AC 3-Phase, 4 wire |
Voltage Stability |
≤±2% |
Voltage transient |
≤±10% |
Voltage Stable time |
≤1s |
Heat consumption |
≤9.8mj/kw.h |
Lubricant consumption |
≤1.0g/kw.h |
Engine Capacity |
32 L |
Cylinder Number |
6 |
Cylinder Bore |
190mm |
Stroke |
210mm |
Starting System |
DC 24V electric motor |
Cooling method |
water cooler |
Lubricant method |
Passive and flying lubricant |
Isolation class |
H |
Protection |
IP23 |
Alternator |
Siemens |
Power Factor |
0.8 lagging |
Exciting method |
brushless |
Colour |
your choice |
Certificates |
ISO 9001:2008, CE |
Warranty |
1 year or 1000 running hours which arrives first |
Type |
Open |
Control system |
Automatic alarm system |
Size |
6200x2100x2800mm(without canopy) |
Weight |
12500kg |
Detail Description
Package & Payment & Delivery Date & Warranty
Package: |
Plastic Package |
Payment: |
By 30% T/T as deposit, 70% balance should be paid 10 days before shipment.Or 100% L/C at sight. |
Delivery: |
25 days after we get the down payment |
Warranty: |
All Topower goods are warranted in accordance with our warranty terms for a period of 12 months from date of despatch or 1000 running hours from date of commissioning whichever date occurs the sooner. |